China wholesaler Big Transmission Torque Gear Coupling with Elastic Pin

Product Description

LZ Elastic Pin Gear Coupling(GB/T5015-2003)

LZ High Quality Elastic Pin Gear Coupling uses nylon rod to turn the column pin into the opposite hole between the 2 half coupling and the outer ring inner surface, and transfers the torque through the column pin to realize the connection between 2 half couplings. It has certain shaft offset compensation ability and shock absorption performance. LZ High Quality Elastic Pin Gear Coupling is symmetrical and interchangeable, long life, allowing large axial movement, and has the performance of cushioning, damping, wear resistance and so on. The shaft holes of the 2 axle head of the pin type coupling of the LZ elastic column are all straight holes.

LZ Elastic Pin Gear Coupling Basic Parameter And Main Diamention(GB/T5015-2003)

Model Nominal Torque
Tn
Kn·m
Speed
(n)
r/min
Shaft hole diameter
d
Shaft hole length D D1 B S Rotary inertia
kg·m2
 
Mass
kg
Y type  J1type
L
 LZ1 0.112 5000 12-24 27-52 76 40 42 2.5 0.001 1.67
LZ2 0.25 5000 16-32 44-82 90 50 50 2.5 0.003 3.00
LZ3 0.63 4500 25-42 44-112 118 65 70 3.0 0.12 7.31
LZ4 1.8 4200 40-60 84-142 158 90 90 4 0.045 16.20
LZ5 4.5 4000 50-80 84-172 192 120 90 4 0.108 27.02
LZ6 8 3300 60-95 107-172 230 130 112 5 0.242 40.59
LZ7 11.2 2900 70-110 107-212 260 160 112 5 0.443 59.60
LZ8 18 2500 80-130 132-252 300 190 128 6 0.908 94.67
LZ9 25 2300 90-150 132-252 335 220 150 7 1.733 13.8
LZ10 31.5 2100 100-170 167-302 355 245 152 8 2.422 169.3
LZ11 40 2000 110-180 167-302 380 260 172 8 3.369 203.1
LZ12 63 1700 130-200 202-352 445 290 182 8 6.524 296.6
LZ13 100 1500 150-240 202-410 515 345 218 8 14.19 469.2
LZ14 125 1400 170-260 242-410 560 390 218 8 21.67 621.7
LZ15 160 1300 190-300 282-470 590 420 240 10 29.52 730.5
LZ16 250 1000 220-340 282-550 695 490 265 10 62.47 1144
LZ17 355 950 240-380 330-550 770 550 285 10 106.0 1557
LZ18 450 850 250-420 330-650 860 605 300 13 175.4 2062
LZ19 630 750 280-450 380-650 970 695 322 14 323.2 3068
LZ20 1120 650 320-500 380-650 1160 800 355 15 669.4 4715
LZ21 1800 530 380-630 450-800 1440 1571 360 18 1880 8699
LZ22 2240 500 420-750 540-800 1520 1100 405 19 2596 9437
LZ23 2800 460 480-850 540-880 1640 1240 440 20 3982 12095

♦Product Display
 

♦Other Products List

Transmission Machinery 
Parts Name
Model
Universal Coupling WS,WSD,WSP
Cardan Shaft SWC,SWP,SWZ
Tooth Coupling CL,CLZ,GCLD,GIICL,
GICL,NGCL,GGCL,GCLK
Disc Coupling JMI,JMIJ,JMII,JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

Our Company

HangZhou CZPT Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.

Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.

Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective. 

Our Services
1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2.Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the market.

5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.

FAQ
Q 1: Are you trading company or manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.

Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the customers with customized artworks of PDF or AI format.

Q 3:How long is your delivery time?
Generally it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples ? Is it free or extra ?
Yes, we could offer the sample but not for free.Actually we have a very good price principle, when you make the bulk order then cost of sample will be deducted.

Q 5: How long is your warranty?
A: Our Warranty is 12 month under normal circumstance.

Q 6: What is the MOQ?
A:Usually our MOQ is 1pcs.

Q 7: Do you have inspection procedures for coupling ?
A:100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order?
A: Sure,welcome to visit our factory.

Q 9: What’s your payment?
A:1) T/T. 

Contact Us
Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China

 

Standard Or Nonstandard: Standard
Shaft Hole: 10-32
Torque: >80N.M
Bore Diameter: 19mm
Speed: 4000r/M
Structure: Flexible
Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

China wholesaler Big Transmission Torque Gear Coupling with Elastic Pin

pin coupling

Are There Any Safety Considerations When Using Pin Couplings in Rotating Machinery?

Yes, there are several safety considerations to keep in mind when using pin couplings in rotating machinery. These considerations are essential to ensure the safe and efficient operation of the equipment and to protect personnel working in the vicinity. Here are some key safety points to consider:

  • Guarding: When installing pin couplings, it is crucial to provide adequate guarding around the coupling area. This helps prevent accidental contact with the rotating coupling components, such as pins and hubs, which could cause severe injuries.
  • Maintenance and Inspection: Regular maintenance and inspection of the pin coupling are vital to identify any signs of wear, misalignment, or damage. Any worn or damaged components should be replaced immediately to prevent coupling failure, which could lead to sudden equipment shutdown or safety hazards.
  • Proper Alignment: Ensuring precise alignment of the connected shafts is crucial to the safe operation of the pin coupling. Misalignment can lead to increased stresses and premature wear on the coupling components, resulting in potential failures.
  • Torque and Speed Limits: Adhering to the manufacturer’s recommended torque and speed limits for the pin coupling is essential for its safe operation. Exceeding these limits can lead to overloading and failure of the coupling.
  • Environmental Considerations: Take into account the operating environment when selecting a pin coupling. Extreme temperatures, corrosive atmospheres, or harsh conditions may require special materials or coatings to ensure the coupling’s integrity and prevent premature failure.
  • Training and Awareness: Operators and maintenance personnel should receive proper training on the safe handling, installation, and maintenance of pin couplings. Awareness of potential hazards and safety protocols is crucial for the safe use of rotating machinery.
  • Emergency Shutdown: Install emergency shutdown systems that can quickly stop the rotating machinery in case of any safety concerns or abnormal conditions.
  • Compliance with Regulations: Ensure that the use of pin couplings complies with all relevant safety and industry regulations and standards.

By taking these safety considerations into account and implementing proper safety measures, the use of pin couplings in rotating machinery can be done safely and effectively, mitigating potential risks and ensuring a safe working environment for personnel.

pin coupling

Can Pin Couplings Be Used for Both Motor-to-Shaft and Shaft-to-Shaft Connections?

Yes, pin couplings can be used for both motor-to-shaft and shaft-to-shaft connections in various mechanical systems. The versatile design of pin couplings allows them to connect two shafts with aligned or misaligned centers, making them suitable for a wide range of applications.

Motor-to-Shaft Connections: In motor-driven systems, pin couplings are commonly used to connect the motor shaft to the driven shaft of the equipment. The motor can be an electric motor, combustion engine, or any other type of power source. The pin coupling efficiently transfers torque from the motor shaft to the equipment’s driven shaft, enabling power transmission and mechanical motion.

Shaft-to-Shaft Connections: Pin couplings are also well-suited for shaft-to-shaft connections, where two separate shafts need to be joined together. This could be the case when extending the length of a shaft or connecting two separate pieces of rotating equipment. The pin coupling provides a secure and flexible connection between the two shafts, allowing torque to be transmitted between them while accommodating misalignment.

It is essential to consider the specific requirements of the application when selecting a pin coupling. Factors such as the amount of misalignment, torque capacity, operating conditions, and space constraints should be taken into account to ensure the coupling can effectively and reliably connect the motor and shafts.

Overall, the versatility and performance of pin couplings make them a popular choice for both motor-to-shaft and shaft-to-shaft connections in various industrial and mechanical systems.

pin coupling

Can Pin Couplings Handle Misalignment Between Shafts?

Yes, pin couplings are designed to accommodate a certain degree of misalignment between shafts in rotating machinery. They are considered flexible couplings, which means they can provide some degree of angular, parallel, and axial misalignment capability.

Pin couplings typically consist of two hubs, each connected to a shaft, and a central sleeve with pins that transmit torque between the hubs. The pins allow for a limited range of movement, which helps to compensate for slight misalignments between the shafts.

The angular misalignment capacity of a pin coupling is achieved through the bending of the pins. When the shafts are misaligned at an angle, the pins on one side of the coupling experience bending while those on the opposite side are in tension. The pins are designed to withstand these bending and tension forces within their elastic limits, ensuring proper functioning and longevity of the coupling.

Similarly, the pins can accommodate parallel misalignment by sliding within the pin holes of the coupling’s central sleeve. This sliding action allows the hubs to move slightly relative to each other, compensating for any offset between the shafts.

However, it is essential to note that pin couplings have limitations in terms of the amount of misalignment they can handle. Excessive misalignment beyond their specified limits can lead to increased wear on the pins and other coupling components, reducing the coupling’s effectiveness and potentially causing premature failure.

While pin couplings are suitable for applications with moderate misalignment requirements, they may not be the best choice for applications with significant misalignment or where precise alignment is critical. In such cases, more flexible couplings like gear or elastomeric couplings may be more appropriate.

Overall, when considering the use of pin couplings, it is essential to carefully evaluate the specific misalignment requirements of the application and select a coupling that can adequately accommodate those misalignments while ensuring reliable and efficient power transmission.

China wholesaler Big Transmission Torque Gear Coupling with Elastic Pin  China wholesaler Big Transmission Torque Gear Coupling with Elastic Pin
editor by CX 2023-09-07